Over the course of a few days, I have seen many people share their latest modeling on a few discussion lists. I reached out to the modelers for permission to share their photos and comments on this blog post. This follows the spirit of our Workbench Wednesday posts but is also like a virtual RPM. I hope these photos and details inspire modelers to open boxes and build kits. Click on any image here to view a larger size. Paul Doggett shared the opening image along with kit details in his comments below. – Eric Hansmann – RCW web guyContinue reading Discussion list shares
Tag Archives: Layout Design
Layout Design with Nelson Moyer, part 7
Warning – Low Clearance Ahead
Nelson Moyer returns with build tips and techniques for duckunders. Click on any image here to review a larger size. Here’s Nelson with his latest tale.
Burlington Yard and Winfield Duckunder
Duckunders are to be avoided. That’s a cardinal rule of layout design. However, there are circumstances where duckunder alternatives are impossible, and my track plan presented me with no choice if I was going to model even a severely truncated facsimile of the CB&Q yard at Burlington, IA. By referring to the track plan in Part 1 of the series, it is immediately evident that the longest unbroken spaces in my basement are on the North and South outside walls, and those walls measure 16- and 18-feet, respectively. That’s not nearly long enough for Burlington, and the placement of those walls is totally wrong for a geographical approximation of the prototype.
Layout Design with Nelson Moyer, part 6
The Helix – Around and Around and It Comes Out Here
Nelson Moyer has been busy building his CB&Q layout. His latest adventure has been building a helix. Here’s Nelson with his tips and techniques. Click on any image here to review a larger size.
Multi-level layouts are becoming more popular as they permit longer runs with more towns, sidings, industries, and thus more switching opportunities in a given footprint. The Burlington-Washington Subdivision of the Chicago, Burlington, and Quincy Railroad ran 53 miles Northwest from Burlington to Washington, IA, with trackage rights on the Chicago, Rock Island, & Pacific from Burlington to Mediapolis, IA, and on the former Burlington and Northwestern tracks from Mediapolis to Washington. The branchline passed through seven towns more or less equally spaced along the route. My goal was to model as many of those towns as I could accommodate in a 13 x 16 foot room.
Layout Design with Nelson Moyer, part 5
Let There Be Light!
Nelson Moyer returns with another summary of his layout design and build. This time out, he presents some great info on layout lighting. Here’s Nelson with his update. Click on any image here to review a larger size.
Part of growing older is visual impairment, and at seventy-four “my eyes grow dim, I cannot see.” Even with my specs. Layout lighting is important to me because I need see in order to lay and wire track, add scenery, structures and details, and to be able to read car numbers if I’m going to operate. It would also be nice to see all the numerical data and chalk marks on my freight cars, since I went to great pains to put them there. The question was, how would I light the layout?