Semi-Scale Coupler Boxes

Resin Car Works announces a new part! These are cast resin, semi-scale coupler boxes designed to work with the Kadee #158 whisker semi-scale coupler. These HO scale parts can be used to upgrade your freight car models. These are the same coupler boxes that were included in the 2017 RPM Chicagoland gift that folks have been asking about.

Check out the Resin Car Works Decals and Parts page for more details and ordering information.

5 thoughts on “Semi-Scale Coupler Boxes

  1. Very nice. Will they work with Sargent couplers? They look like Sargent’s “compatible” line would work, but I’d like to be sure.

    1. Bob, as per the details in this blog post and on the Resin Car Works website, these new semi-scale coupler boxes are designed to work with the Kadee #158 whisker semi-scale coupler. These were not designed to be compatible with the Sergent products. – Eric H.

  2. Very interesting. Will these coupler boxes work with Sergent Couplers also? Are they accurate for “riveted” or welded cover plates? Smoky Mountain Model Works just announced the same/similar product. I’ll have to order a set of each and see how they compare to each other and to Moloco coupler boxes aka draft gear.

    1. Nathan, as per the details in this blog post and on the Resin Car Works website, these new semi-scale coupler boxes are designed to work with the Kadee #158 whisker semi-scale coupler. These were not designed to be compatible with the Sergent products. – Eric H.

Comments are closed.