Tag Archives: update

St. Louis RPM summary

RPM, , ,

The recent St. Louis RPM meet was well attended with more than 650 through the doors. Additionally, there were nearly 3000 wonderful models displayed. Bill Welch sent along his thoughts on the meet with a few photos. Links to photo galleries are posted at the end. Here’s Bill!

Here is my take on what I saw and heard at the St. Louis RPM. Bob’s Photo had about 20 binders that he characterized as new photos, both color and B&W, in addition to his usual array of old milk crates of photos sorted by railroad.

Continue reading St. Louis RPM summary →

SFRD reefer kits

New Kit, Resin Car Works Update, , ,

Santa Fe Refrigerator Department reefers are the latest Resin Car Works HO scale freight car kit! A total of 1,360 SFRD rebuilds in the RR-35, -36, -39, and -40 classes were added in the mid-1940s. This new kit reflects these prototypes. Decals were created directly from prototype images. Tahoe Models #012 USRA 50-ton Andrews sideframes are provided in the kit.

Visit our website for details and ordering information.

Kit updates

In other Resin Car Works kit news, the CB&Q XM-32 AAR 40-foot steel boxcar (Kit 8.01) is again available. Our decal supply has been replenished and kits are shipping for those orders that had been on hand.

Our AC&F Type 27, 10,000-gallon, insulated tank car kits (Kit 6.0) are no longer available. All of our formerly available kits can be found on this webpage. Click on any of those model names or images to access the original information pages plus the links to the kit Extras pages.

All of our kit instructions are available as downloadable PDF files that are on the Extras page for each specific kit.

Keep on building!

July RCW kit updates

Resin Car Works Update, , , , ,

It’s time for another update on Resin Car Works kits!

The CB&Q XM-32 boxcars (Kit 8.01) remain on hold as we await a decal shipment. Up next will be the SFRD Rr-35/36/39/40 refrigerator cars. These will be released at the Santa Fe Historical and Modeling Society convention in Lisle (same place as RPM Chicagoland) on the July 21st weekend. We will post a blog announcement when these kits are available via the Resin Car Works kits page.

A flat car load is nearly ready. This will be an electrical transformer load. Frank did a similar load for Sunshine Models years ago. This new version will be a one-piece kit with some extra crates.

Coming in the fall, we hope to release the Soo 50-foot, steel-sheathed automobile boxcar. If casting goes well, we will try and have the 70-ton Milwaukee Road composite gondolas available.

Looking beyond, a UTLX 6.5K gallon X-3 tank car with two frame styles is targeted towards the end of 2018, or early 2019.

New Equipco brake wheel parts

Resin Car Works Update, , ,

Resin Car Works has a new HO scale detail part available. Distinctive Equipco hand brake wheels and gearboxes were used on many freight cars from the 1930s and into the 1960s. The parts are 3D prints from Shapeways, printed with the Fine Ultimate Detail material otherwise known as FUD.

We thank Gene Green for his expertise and access to his archive. These parts could not have been produced without his assistance. The brake wheel part follows a late 1930s Equipco design. This is the only Equipco version Resin Car Works is producing at this time.

Please visit the Resin Car Works Decals & Parts web page for more details.

Please note these Equipco brake wheel parts will be made as orders arrive. Delivery to your door may be delayed.