All posts by RCWadmin

Wabash 12-panel welded box car from Yarmouth Model Works

Models, Resin Freight Cars, Techniques, ,

201511zeni_WABxm_a

Craig Zeni recently built an HO scale Yarmouth Model Works Wabash box car kit. He steps in with thoughts on the model and construction processes.

At first blush upon opening the box, this Yarmouth Model Works kit is a lot like many other kits with folded printed instructions, the one piece car body, and the separate floor wrapped in tissue paper. What is different is that one is greeted by the etched running board taped to the inside of the box lid and the balance of the parts in small zip lock bags. One thing I found very refreshing to see are etched parts for the ladders, brake levers and other brake brackets instead of resin pieces. Kadee grabs, Kadee Miner brake wheel, Moloco Miner brake housing, Tichy brake parts, and phosphor bronze wire make up the rest. The included decals are from Black Cat and are very nice, and trucks from Kato. This is a top shelf kit.

The castings themselves are outstanding. Very little flash was evident on the main body casting. I had it cleaned up and ready to go in about 10 minutes; the crossbearers and such not much longer. There are a lot of styrene kits that wish their parts were this clean.

Continue reading Wabash 12-panel welded box car from Yarmouth Model Works →

“Like Things at Like Times:” Building Two Kits at Once – Pt 2

Models, Resin Freight Cars, Techniques,

welch2gons_intro

Here’s part two of Bill Welch building two gondolas at once. Part one can be found here.

In preparation for painting, I like to media blast models with Baking Soda to slightly roughen/etch the surface. A thorough soaking in Ivory Snow is next followed by a good rinse in clear water. I like to do this kind of work in batches of four to six models.

Continue reading “Like Things at Like Times:” Building Two Kits at Once – Pt 2 →

“Like Things at Like Times:” Building Two Kits at Once – Pt 1

Details, Resin Freight Cars, Techniques,

welch2gons_intro

Bill Welch returns with a double treat. Click on any image here to review a larger size.

For years now whenever I can, I try to build two models at the same time. There are many similar steps for each build, such as washing parts, removing flash, drilling holes, mounting brake systems, installing grab irons, and more. Adding work time to an extra model on the bench seems to reduce the overall build time for two models.

Resin kit building usually involves a lot of hole drilling. I like to use a sharp object to create a starting point for the drill bit so that it will not wander. Mine is different from the one pictured in that link. When drilling holes for sill steps, I like to make a starter hole with a smaller bit before I drill the final hole with a #75 bit. It is just as easy to do this on two cars at once as it is to do it on one. Body motions like changing bits require time, so doing two models at one time can actually save time. My modeling/railroad historian/general raconteur friend Dr. Frank Peacock, DDS, observes that in dentistry this approach is termed “like things at like times.” As my description with the two Funaro & Camerlengo gondola kits will demonstrate, the two models only need to be similar, not identical.

Continue reading “Like Things at Like Times:” Building Two Kits at Once – Pt 1 →

Resin Car Works new kit!

Models, New Kit,

grain_bins4

Resin Car Works announces a new kit to kick off their Scene Setters line focused on once common elements that weren’t far from the tracks. These simple kits can enhance a scene on your model railroad. The first Scene Setter kit represents an iconic Midwest structure, a round corrugated metal grain bin.

The prototypes began with a government grain storage program in the 1930s and thousands of these grain bins were installed in towns across the Midwest.

The Resin Car Works HO scale model is a one piece resin casting and will only need to be painted before it is set into a scene on your railroad. Four grain bins are included for only $36, plus postage and handling. Check out some completed model photographs and review the kit instructions on our website.

Resin Car Works has several of the acid tank car kits in stock, but supplies are getting very low. A new freight car kit is also nearing completion. We hope to share more news very soon on this exciting HO scale model.